Four Simple Steps for Using a Hand Saw for Acrylic Sheet Cutting

If you are planning on creating an acrylic glass sign for your business, you should consider purchasing cut-to-size material. This is an ideal solution because the plastic sheeting will be prepared by professionals in your preferred dimensions. Therefore, there will be no need for further cutting before signage creation. However, it is possible to purchase the acrylic material and cut it onsite. This is a good approach if you would like to use the acrylic for other purposes. Here are simple steps for using a handsaw to cut your plastic sheeting.

Plan Your Design

It is important to have a design in mind when planning to cut acrylic sheeting for your business signage. If you are looking to create a simple sign, you can opt for a simple square or rectangular design. However, there are no limitations for a unique item. There are numerous shapes and dimensions to consider for signs, depending on your preference and type of business. You can even design a product that has a shape that represents your business.

Prepare an Outline

When you complete your design, you should create an outline to put on the acrylic sheeting. This outline will serve as a guide when cutting the plastic into the desired size and shape. You should note that this is essential whether your signage design is a simple square or a more intricate shape. Preparing the outline is not difficult. You will only need to draw the design using a grease pencil or a regular marker pen. Check the outline and ensure that it is as you would like before proceeding.

Secure the Sheeting

It is critical for you to keep the acrylic sheet in a secured position before cutting. If the material is not secured, you will not be able to make accurate cuts. The sheeting will keep moving and vibrating as it is handled. Consequently, there will be imperfections along the edges of the signage. Therefore, you should have a clamp on your working space. Secure the sheeting such that the area to be sawed is left over the edge of the worktable.

Saw with Care

Finally, you should begin sawing with care. For this phase, acquire a saw with fine teeth. This type of blade will create a more refined cut. Also, it will minimise the risk of material damage. Avoid using carpentry saws because their large teeth will leave a lot of edge imperfections, necessitating extensive polishing. When sawing the acrylic glass, ensure that you are cutting along the outline.

To learn more about cut-to-size perspex sheeting, contact a supplier.